All Categories
EN

Home >Products >Network /signal surge protect >POE Surge Protector >

Rack-mounted surge protectors, 8-port, 16-port, 24-port, 100Mbps, 1000Mbps, 10000Mbps, POE SPD WPX-PTSA-24R4-48

Rack-mounted surge protectors, 8-port, 16-port, 24-port, 100Mbps, 1000Mbps, 10000Mbps, POE SPD WPX-PTSA-24R4-48


Rack-mounted network surge protectors, with 8 ports, 16 ports, 24 ports, 100Mbps, 1000Mbps, 10000Mbps, are used to protect the internal interface circuits of high-speed Ethernet. They are connected in series to the input end of the protected equipment. When the transmission line is subjected to lightning induction, the lightning current passes through the lightning branch of the protector and is dissipated to the ground, and the lightning overvoltage is clamped within the allowable voltage range of the equipment, thus ensuring the safety of the equipment.

The product has the characteristics of high transmission rate, fast response speed, and low protection level. It can effectively improve the ability of Ethernet networks to resist overvoltage and lightning pulses, and is used in traffic network monitoring and information center (application scope: power, telecommunications, transportation, security monitoring).

Contact E-mail:service@hnwpx.com  WhatsApp:+8613507311110

When both parties collaborate, customers can request customized research and development, production, and product processing - supporting OEM cooperation.

The pre-sale, in-sale and after-sale services of the products usually cover the following core contents: 

Pre-sales Service: Product consultation, demand analysis, solution design, technical demonstration, quotation and sample trial support, aiming to guide decisions, build trust and facilitate purchases. Sample delivery - 3 days. Batch delivery is based on customer requirements, taking 15 to 20 days.

‌Pre-sales service‌: Order processing, contract signing, payment coordination, logistics tracking, delivery arrangement, basic usage training, to ensure smooth transactions, transparent information, and timely delivery.

‌After-sales service‌: Installation guidance, technical support, repair and return (including "three guarantees")customer follow-up, complaint handling, warranty services and upgrade suggestions, to guarantee the usage experience and enhance cooperation loyalty.


Specifications
Model NumberWPX-PTSA-24R4-48
Art No. 
Operating Temperature Range-40℃~80℃
Relative Humidity≤95%(25℃)
Atmospheric Pressure86~106 kPa
Working Voltage( Uo)48V
DC Max. continuous operating voltage(URCR)58V
Max Working Current IRL0.8A
POE power supply1,2-3,6 or 4,5-7,8 ;Total 75W
C2 Total nominal discharge current (8/20μs)(Itotal)10kA
C2 Nominal discharge current (8/20μs)per wire(In)2.5kA
Total nominal discharge current C2 -PE(Itotal)20kA
Nominal discharge current per wire C2-PE(In)2.5kA
Voltage protection level wire-wire (UP)≤40V
Voltage protection level wire-PE(UP)≤1000V
Voltage protection level wire-wire 1kV/μsC3(UP)≤20V
Voltage protection level wire-PE 1kV/μsC3(UP)≤600V
Response time(tA)≤1ns
Insertion loss(100MHz)≤1.0dB
transmission rate1000Mbps
Impedance in series≤0.5Ω
Protected pin1/2;3/6;4/5;7/8
Wiring methodsRJ45(shield)
Port numbersin-16×RJ45;out-16×RJ45
Housing materialSPCC
Degree of protectionIP20
Installation placeIndoor
Installation methods1U/19-inch rack
Diagram of dimensions

0d37f7a284bea8c169493493458efce9.jpg


b65fb92466436d7138564fb5190a18a2.png

Description

The POE surge protector series is used to protect the interface circuit of high-speed Ethernet. It is connected to the input end of the protected device. When the transmission line is hit by lightning, the lightning current discharges to the ground through the lightning branch ,and clamps the lightning overvoltage within the appropriate range, thus ensuring the safety of the equipment.

INQUIRY

Worktime:8:00 ~ 17:00

ENQUIRE NOW

close
Enquire Now